Once all feet are off, make sure to clean the surface with rubbing alcohol to remove any adhesive and let dry.

This method involves using the hairdryer to heat up the glue underneath the mouse feet. Once the glue has been heated long enough, use a spudger (a flat plastic tool with a sharp end) or a knife to scrape underneath the feet to peel them off — be careful if using a knife! These are not 100% PTFE feet like the HyperGlides but are ‘Silver Treated PTFE’ and contain a silver lubricant to assist the glide. To enhance the natural properties of the material, a mandatory final grinding is carried out. As a result, immediately after installation, the glides demonstrate the best sliding properties. There is no need to additionally “grind” it during operation. An up and comer for sure. None of their feet are pure PTFE, instead, they offer 3 different lines that cater to different tastes: You may have never thought of replacing your mouse skates, or that high-quality replacements were even a thing, but just like any enthusiast gear there's always a way to step things up a notch.

Trending Articles

With a little preparation and some simple steps, you can enjoy better control and performance like the pros. Some users recommend pushing down hard on your mouse skates and even kneading them to remove air bubbles, but I don’t think that’s necessary. Zowie recommends holding the mouse with both hands and pushing down gently before “glid[ing] the mouse left and right” to bed your new mouse feet in. Reduces wrist fatigue when working for more than 2-3 hours. This is true for both players. as well as for professionals whose work is associated with a constant stay at the PC. Finally, once the grip tape is properly applied, use a sharp hobby knife or scissors to trim any excess grip tape from around the edges of your mouse. Trimming the edges gives your mouse a clean and finished look. A competitive gaming mouse pad needs to have less resistance than all others, and that's exactly what the Roccat Sense Pro offers. It's not too textured that it requires a massive adjustment on your part, but we have found its surface to be just slightly less smooth to glide over. But, that's also the exact point – it's that textured finish that allows for fast, agile movements that are ideal for competitive gaming.

Meanwhile, it has a good rubber base that's pretty great at keeping it in place as well as reinforced edge stitching that ensures minimal fraying. Because it's also made of polyester military-grade fabric, you know that this will last you a good while. You’ve probably seen mouse pads out there that have built-in raised wrist rests of some kind at the bottom of the pad (usually gel-filled) to give your wrist some added support. We used one of these in the distant past, though, and didn’t find it helped – and over time, in fact, we became somewhat concerned that it might hinder in terms of wrist health if anything.For gamers increasing the speed of movement of the manipulator is an obvious competitive advantage. First of all, this applies to competitive disciplines in the shooter genre: CS: GO, Call of Duty: Warzone, etc. At the FeetGlide online store you can buy skates for mice from different brands. Such as: Logitech, Razer, SteelSeries, HyperX, and others, the list of which is given below: